The Zebralight H501W is a high performance, versatile, all aluminum headlamp with
a WARM White tint LED. The H501W can also be used as a general purpose
angled flashlight without its headband. Three light levels spread far
apart, easily selected with a pushbutton switch. Powered with one AA
size battery, the H501W can produce a maximum of 80 Lumens of smooth
flood light.
Main Features and Specifications
Light Output: Constant ratio output level spread. Current regulated.
80 Lumens (2.3 hr) on High 15 Lumens (19 hr) on Medium 2.7 Lumens (3.5 days) on Low
Light output and runtimes are measured using a Sanyo 2700 mAh NiMH battery. Light output are out the front values.
LED: CREE XLamp XR-E Q3 5A
Weight
21 gram (0.74 oz) 41 gram (1.45 oz) with an alkaline battery 63 gram (2.22 oz) with a battery and headband
Dimensions
Diameter 18.5 mm (3/4”) Height 71.2 mm (2 3/4”)
Battery: One AA size 1.5v alkaline, 1.7v lithium primary, 1.2v NiMH rechargeable,
or 3.7v 14500 Li-ion rechargeable. Reverse polarity protection.
Beam Type: 80 degree flood, with no hotspot
Construction Soft touch pushbutton switch, with a minimum operating life of one million cycles. Recessed impact resistant LEXAN polycarbonate lens. Precision 3D machined casing from premium grade Alcoa aluminum alloy billet, light weight with superior structural strength. Electrically conductive aluminum body provides inherent EMI/RFI shielding. Durable hard anodized finish.
Waterproof
Meets IP68 in accordance with IEC 60529
Dust-tight Protected against continuous immersion (1 meter, >30 minutes)
Operations
From Off
Press and hold to cycle through Low, Med and High, release to set. Click to High, click again quickly to cycle through Med, Low and High.
When On
Click to Off. Press and hold to cycle through Low, Med and High, release to set.
When High
Double click to toggle between Strobe mode and High.
Accessories included in package
One black silicone holder with headband One glow in the dark silicone holder Removable pocket clip Two spare O-rings