For the ultra discriminating palate -
EagTac Titanium D25A CLICKY 2017 version, revised style and featuring harden surface treatment, XP-L V3 HI Domeless LED, or newly available NICHIA 219c 4000K CRI92 LED.
(Please Note: Virtually all of our Flashlight Models have several LED choices to select from... please click "LED Choice" on the right side of this page to see what LED is available for this Model)
EagleTac D25A CLICKY Ti - 1xAA - 200 Lumens
1xAA battery, Operating Voltage Range: 0.8V to 1.5V
(also compatible with 3.7V 14500 li-ion for producing approx. 400 Lumens)
CREE XP-L HI Domeless LED
LED Lumen: 200 / 121 / 11 / 1
ANSI Lumen: 147 / 88 / 10 / 0.5
Center LUX: 1,200
AVAILABLE FOR LIMITED TIME: CREE XP-L V3 "HI" Domeless LED - 200 Lumen, 1,200 LUX.
or new Nichia 219c 4000K HIGH CRI-92 LED .
Runtimes: (Turbo/high/low/moon) 1.3/2.5/20/150+ hours
Length: 3.4 inch (8.7 cm)
Body Diameter: 0.65 inch (1.7 cm)
Head Diameter: 0.7 inch (1.75 cm)
Body Weight (excluding batteries): 0.85 ounces (24 grams)
# Using 4.2V li-ion direct drives the LED and yields maximum output at the expense of extensive heat generated from the LED. Limit each usage to less than fives minutes (or less than one minute each with freshly charged li-ion for the first couple times). Active cooling (blowing cool air toward the light) or passive cooling (holding the light in your hand) helps preventing excessive heat built at the LED. Turn off the light to allow it to cool down if you find the flashlight too hot to hold. Do not leave the light running unintended with li-ion.
- Spare o-rings
- User Manual
- Rigid Nylon Holster w/ self-retention device and flip
- Mil-Spec Paracord Lanyard w/ quick attachment clip