illuminationGear World-Class Tactical & Professional illumination Tools
EagTac MX25L3

EagTac MX25L3

EagTac~EagleTac MX25L3 MT-G2 - 3x18650 Battery or 6xCR123 - 2,750 Lumen compact light
(Lumen output is same with all battery types - but do not mix types!)

(Please Note: Virtually all of our Flashlight Models have several LED choices to select from... please click "LED Choice" on the right side of this page to see what LED is available for this Model)

CREE MT-G2 LED (5000K "Neutral")
LED Lumen 2,750
ANSI Lumen 2,375
LUX 45,100 

CREE MT-G2 LED (5000K)
Four brightness levels (Regular mode)

Led lumen: 2750*-2320 / 1220 / 205 / 35
ANSI lumen: 2375*-2006 / 1057 / 175 / 28
Runtime: 1.5 / 3.3 / 21 / 350+ hours

Two brightness levels (Tactical mode)
Led lumen: 2750*-2320 / 281 / Strobe I / Strobe II
ANSI lumen: 2375*-2006 / 243/Strobe I / Strobe II
Runtime: 1.5 / 19 hours 

*Turbo boost technology is activated every time you turn on at turbo output setting. It offers 25% more power to the LED for the first 200 seconds at turbo mode. User can customize this setting.

When battery voltage is low, the LED will flash once every 30 seconds to remind you that the battery is almost out. Lower the output to extend runtime and replace batteries as soon as possible.

Seven hidden auxiliary outputs - Strobe/Strobe(Var)/Flash(Hi)/S.O.S.(Fast)/S.O.S./Beacon/Flash(Lo)

Head Dia. 2.5 inches (62 mm)
Body Dia. 1.8 inches (45.5 mm)
Length: 6.5 inches (144 mm)
Weight: 13 ounces (368 grams)

Battery Type:
Uses 3x18650 Rechargeable Li-Ion Batteries, or
6xCR123 Lithium Batteries (Do not use 3.7V RCR123/16340's!)
Operating voltage: 5.4V - 19V

Battery types runtime: Do not mix battery types! 
Below lists the turbo output runtime with different battery types:

w/ energy saving enabled
MT-G2 P0 LED: (3xEAGTAC 3400mAh) 1.5hrs, (3xEAGTAC 2500mAh) 1hrs, (6xCR123A) 0.8hr 

w/ energy saving disabled

MT-G2 P0 LED: (3xEAGTAC 3400mAh) 1.3hrs, (3xEAGTAC 2500mAh) 0.9hrs, (6xCR123A) 0.7hr

* Do not use six RCR123/16340 as it may exceed the maximum voltage (i.e. 19V) that the LED driver can handle.

MX25L3 flashlight w/ Flat/Smooth aluminum bezel
Spare o-rings
User Manual
Mil-Spec Para-cord Lanyard w/ quick attachment clip
Flat Tail-Stand Cap

(YRGB Kit currently must be purchased with Light, as the Tail Cap switch will not function with Base Light body)

(Extra) signal connection through the body tube for rear accessories add-on
(Extra) tailcap w/ tail switch and tail-standing ability (light can be switched on via head or included tail switch)
Flashlight head comes with front-mount thread for bezel and filter attachment, Stainless Steel Crenulated bezel. Heavy Duty Nylon Holster w/ self-retention device and open-top design. ET47 Diffuser filter, ET47 Yellow filter, ET47 Red filter, ET47 Green filter, ET47 Blue filter.

NOTE: Due to the high output nature of the MX25L3 - "matched" high output 18650 batteries are required for optimal output and runtime performance. The batteries must be able to provide 4.0+amps of power - which the "cheap" Ultra/TrustFire 18650 batteries are unable to provide. We recommend our EagleTac 18650's for best fit, max output, and runtimes.

$134.99 $89.99
This item is out of stock