EAGTAC D25A MKII CLICKY - 1xAA - now up to 405 Lumens! available with several choices of LED...
1xAA battery, Operating Voltage Range: 0.8V to 1.5V (also compatible with 3.7V 14500 li-ion for producing up to 800 Lumens)
(Please Note: Virtually all of our Flashlight Models have several LED choices to select from... please click "LED Choice" on the right side of this page to see what LED is available for this Model)
CREE XM-L2 U4 LED
LED Lumen: 405*-232/16/2
OTF Lumen: 286*-167/11/2
Center LUX: 1,200
ALSO AVAILABLE: CREE XP-L "HI" Domeless LED - 353 Lumen, 2,050 LUX, and NEW OSRAM CSLPM1 High LUX LED, 310 Lumens, approx 3,000 LUX.
CREE XP-L HI Domeless LED
LED Lumen: 353*-199/15/2
ANSI Lumen: 260-145/11/2
Center LUX: 2,050
And... for the discriminating palate
Nichia 219c 4000K HIGH CRI-92 LED .
LED Lumen: 275*-149/13/2
OTF Lumen: 195-109/9/2
Center LUX: 1,250
(*Turbo/high/low/moon) 1-2.2/35/150+ hours
Length: 3.4 inch (8.7 cm)
Body Diameter: 0.65 inch (1.7 cm)
Head Diameter: 0.7 inch (1.75 cm)
Body Weight (excluding batteries): 0.85 ounces (24 grams)
Using 4.2V li-ion direct drives the LED and yields maximum output at the expense of extensive heat generated from the LED. Limit each usage to less than fives minutes (or less than one minute each with freshly charged li-ion for the first couple times). Active cooling (blowing cool air toward the light) or passive cooling (holding the light in your hand) helps preventing excessive heat built at the LED. Turn off the light to allow it to cool down if you find the flashlight too hot to hold. Do not leave the light running unintended with li-ion. During direct drive, output at low and medium mode will be higher than normal.
- Stainless steel bezel w/ durable dark titanium coating
- Spare o-rings
- Stainless steel pocket clip (Titanium Coated)
- User Manual
- Rigid Nylon Holster w/ self-retention device and flip
- Mil-Spec Paracord Lanyard w/ quick attachment clip