For the ultra discriminating palate -
EAGTAC Titanium D3C CLICKY, revised style and featuring harden surface treatment, XM-L2 or XP-L HI Domeless LED, or NICHIA 219c CRI92 LED... 1xCR123A battery Operating Voltage Range: 1.8V to 4.2V (*also compatible with 3.7V RCR123A/16340 li-ion)
(Please Note: Virtually all of our Flashlight Models have several LED choices to select from... please click "LED Choice" on the right side of this page to see what LED is available for this Model)
CREE XM-L2 LED
LED Lumen: 800*~410 / 155 / 55-35-21 / 16-2-0.5
ANSI Lumen: 560*~310 / 120 / 40-26-17 / 13-2-0.5
Center LUX: 4,100
CREE XP-L HI Domeless LED
LED Lumen: 680*-349 / 132 / 47-30-18 / 14-1.7-.425
ANSI Lumen: 330 / TBD
Center LUX: 6,200
or NEW OSRAM CSLPM1 High LUX LED, 650 Lumens, approx 10,250 LUX.
ALSO AVAILABLE: new Nichia 219c 4000K HIGH CRI-92 LED.
LED lumen: 510*/ TBD
ANSI FL-1 lumen: 370*/ TBD
Center LUX: 3,200
Runtimes: 0.6-1.0/1.5/4.5/10-18-25/50-200-300 hours
Length: 2.9 inch (7.5 cm)
Body Diameter: 0.78 inch (2 cm)
Head Diameter: 0.78 inch (2 cm)
Body Weight (excluding batteries): 1.4 ounce (40 grams)
*At maximum output level (100%), the active thermal management feature slowly reduce the maximum output level according to the flashlight internal temperature to 50% once flashlight reaches 140°F (60 °C) (higher surrounding temperature may result in higher flashlight temperature). It's normal for high power flashlight to run hot at MAX level. Reduce the output if the user finds the flashlight too warm to hold.
*Output is same regardless of battery type used. Active cooling (blowing cool air toward the light) or passive cooling (holding the light in your hand) helps preventing excessive heat built at the LED. Turn off the light to allow it to cool down if you find the flashlight too hot to hold. Do not leave the light running unintended with li-ion.
- Spare o-rings
- User Manual
- Rigid Nylon Holster w/ self-retention device and flip
- Mil-Spec Paracord Lanyard w/ quick attachment clip