illuminationGear World-Class Tactical & Professional illumination Tools


EAGTAC DX3B-Mini Pro (renamed from DX30B-MR) Rechargeable ~ 3.4 inches (86mm) ~ and offering up to 2,480 Lumens (1,830 ANSI Lumens) using one of SIX optional LED choices, for maximum flexibility of use and personal taste ~ using the included 18350 rechargeable battery. And now using newest 2018 v2 (lower low mode) circuit and VLOP reflector for improved beam characteristics w/ NW & HI LED, the DX3B Pro includes thermal management and low voltage circuitry, deep two-way pocket clip, and more. Full specs. can be found here...

(Please Note: Virtually all of our Flashlight Models have several LED choices to select from... please click "LED Choice" on the right side of this page to see what LED is available for this Model)
  • CREE XHP50.2 LED produces 2,480 Lumens, with lowest 6,800 LUX
    (best maximum short-medium distance floody output).
  • no longer available CREE XHP35 HI LED produces 1,870 Lumens, with highest 16,500 LUX
    (best maximum reach/throwy output).
  • no longer available CREE XHP35 HD LED produces 2,000 Lumens, with moderate 9,200 LUX
    (best general purpose output).

    (All three LED above are available in Standard Cool, or Optional Neutral White Tint. ~ see our FAQ page about CW/NW Tint, Lumens vs LUX)

LED Lumen 2,480
ANSI Lumen 1,830
LUX 6,800

Output: FIVE output levels
XH-P50.2 2,480*-1,500 / 1,100 / 420 / 150 / 15 lumen
(ANSI FL-1 lumen: 1,830*-1,220 / 910 / 350 / 125 / 13

Runtimes XH-P50.2:
  0.15*-0.25 / 0.35 / 1.2 / 3.5 / 24 hours (using 1x18350 800mAh Battery)
  0.8*-1.2 / 1.8 / 5.5 / 17 / 120 hours (using 1x18650 3500mAh Battery)

*Turbo Boost for 30 Seconds, or until thermal management feature is activated (see info below for more detail).

Dimensions (all models):
Length: 3.4"
inch (86 mm)  w/ 18350 Tube
Length: 4.6" inch (116 mm)  w/ 18650 Tube
Body Diameter: 0.85 inch (22 mm) 
Head Diameter: 0.9 inch (22.5 mm)

Body Weight (including batteries):
2.6 ounces (75 grams)

Battery Type: Uses 1x18350 (or KIT version 1x18650)
Operating voltage: 2.7v-4.2v (Single Li-ion)

The built-in rechargeable function only works with a single 18350 / 18650 li-ion battery. 

What's Included
  • DX3B-Mini Pro flashlight
  • Crenulated Stainless Steel Bezel
  • Harden stainless steel deep pocket
    two-way clip with titanium alloy dark vacuum coated finish
  • Tailstand tailcap with magnet
  • Body extension tube for 1x18650 (18650 not included)
  • UL Certified USB 5v 1A Wall Charger (100-240v)
  • Rigid Nylon Holster w/ Self Retention Device
  • 3.7v 800mAh IMR18350 rechargeable unprotected li-ion battery
  • Spare o-rings
  • Spare Micro-USB port rubber cover
  • User Manual
  • Mil-Spec Paracord Lanyard w/ quick attachment clip
  • Micro USB Charging Cable (3'.3"/1 Meter)
*After 30 seconds at maximum output level (100%), the active thermal management feature will be activated and continuously adjusts the maximum output level according to the flashlight internal temperature. The adjustment output range is between 70%-100%. This feature maintains the flashlight surface temperature to be about 130°F (54 °C) for W1900 (higher surrounding temperature may result in higher flashlight temperature). It's normal for high power flashlight to run hot at MAX level. Reduce the output if the user finds the flashlight too warm to hold.
(Note: The stainless steel silver one-way clip, and/or non-magnet tailcap is available as options in the ET accessories section)
NOTE2: Due to the very high output nature of the DX30B-MR - a high output EAGTAC IMR18350 (or 18650) battery is required for optimal output and runtime performance and safety. The battery must be able to provide 10+amps of power - which the "cheap" Ultra/TrustFire and most other 18350/18650 batteries are unable to provide. We recommend our EagTac 10amp IMR18350 & 10amp 18650 3500mAh for best fit, max output, and runtimes.
$99.90 $74.90
There is only 1 item left in stock.
This item is out of stock