EagTac DX3B CLICKY Pro (RECHARGEABLE)

NEW EAGTAC DX3B CLICKY Pro Rechargeable ~ 3.9 inches (100mm) ~ and offering up to 2,480 Lumens (1,830 ANSI Lumens) using one of SIX optional LED choices, for maximum flexibility of use and personal taste ~ using the included 18350 rechargeable battery. The DX3B Pro includes thermal management and low voltage circuitry, deep two-way pocket clip, and more. Full specs. can be found here... http://www.eagtac.com/html/dx3brcpro/specs.html

(Please Note: Virtually all of our Flashlight Models have several LED choices to select from... please click "LED Choice" on the right side of this page to see what LED is available for this Model)

• CREE XHP35 HI LED produces 1,870 Lumens, with highest 16,500 LUX
  (best maximum reach/throwy output).

• CREE XHP35 HD LED produces 2,000 Lumens, with moderate 9,200 LUX
  (best general purpose output).
  

• CREE XHP50.2 LED produces 2,480 Lumens, with lowest 6,800 LUX
  (best maximum short-medium distance floody output).
  (All three LED above are available in Standard Cool, or Optional Neutral White Tint. ~ see our FAQ page about CW/NW Tint, Lumens vs LUX)
  

CREE XH-P35 HI LED:
LED Lumen 1,870
ANSI Lumen 1,406
LUX 16,500
or
CREE XH-P35 HD LED:
LED Lumen 2,000
ANSI Lumen 1,605
LUX 9,200

Output: FIVE output levels(iG)
XH-P35 HI 1,870*-1,230 / 820 / 305 / 125 / 13 lumen (ANSI FL-1 lumen: 1,400*-970/656/245/100/11)
XH-P35 HD 2,000*-1,320 / 860 / 340 / 135 / 15 lumen (ANSI FL-1 lumen: 1,500*-1,070/705/280/110/12)

Runtimes XH-P35 HI/HD:(iG)
  0.2*-0.3 / 0.45 / 1.4 / 4 / 24 hours (using 1x18350 800mAh Battery)
*Turbo Boost for 30 Seconds, or until thermal management feature is activated (see info below for more detail).

or
CREE XH-P50.2 LED:
LED Lumen 2,480
ANSI Lumen 1,830
LUX 6,800

Output: FIVE output levels(iG)
XH-P50.2 2,480*-1,500 / 1,100 / 420 / 150 / 15 lumen
(ANSI FL-1 lumen: 1,830*-1,220 / 910 / 350 / 125 / 13)

Runtimes XH-P50.2:(iG)
  0.15*-0.25 / 0.35 / 1.2 / 3.5 / 24 hours (using 1x18350 800mAh Battery)
*Turbo Boost for 30 Seconds, or until thermal management feature is activated (see info below for more detail).

or, NEW OSRAM CSLPM1 High LUX LED, 1,180 Lumens, approx 25,000 LUX.

Dimensions (all models):(iG)
Length: 3.9" inch (100 mm)  w/ 18350 Tube
Body Diameter: 0.85 inch (22 mm) 
Head Diameter: 0.9 inch (22.5 mm)
Body Weight (including batteries): 3 ounces (85 grams)

Battery Type: Uses 1x18350
Operating voltage: 2.7v-4.2v (Single Li-ion)

The built-in rechargeable function only works with a single 18350 li-ion battery. 

(If you want 18650 powered/longer runtimes ~ see DX3L model)

What's Included

• DX3B CLICKY Pro flashlight
• Crenulated Stainless Steel Bezel
• Harden stainless steel deep pocket
  two-way clip with titanium alloy dark vacuum coated finish
• UL Certified USB 5v 1A Wall Charger (100-240v)
• Rigid Nylon Holster w/ Self Retention Device
• 3.7v 1300mAh INR18350 rechargeable protected li-ion battery
• Spare o-rings
  
• Spare Micro-USB port rubber cover
  
• User Manual
• Mil-Spec Paracord Lanyard w/ quick attachment clip
• Micro USB Charging Cable (3'.3"/1 Meter)

*After 30 seconds at maximum output level (100%), the active thermal management feature will be activated and continuously adjusts the maximum output level according to the flashlight internal temperature. The adjustment output range is between 70%-100%. This feature maintains the flashlight surface temperature to be about 130°F (54 °C) for W1900 (higher surrounding temperature may result in higher flashlight temperature). It's normal for high power flashlight to run hot at MAX level. Reduce the output if the user finds the flashlight too warm to hold.

(Note: The stainless steel silver one-way clip, and/or non-magnet tailcap is available as options in the ET accessories section)

NOTE2: Due to the very high output nature of the DX3B - a high output EAGTAC IMR18350 battery is required for optimal output and runtime performance and safety. The battery must be able to provide 10+amps of power - which the "cheap" Ultra/TrustFire and most other 18350/18650 batteries are unable to provide. We recommend our EagTac 10amp IMR18350 for best fit, max output, and runtimes.